Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                   Interlock / selective Sw. - Proximity switch

                    Aux. contact of transducer / detector

 As I/O of S/W PLC Controller

 Industrial ON/OFF control

 High speed counter

 Trigger event counter

 Quadrature encoder counter

 Up/down or pulse / direction counter

 PWM controller

Features

 PCIe plug and play function with card ID for 16 identical cards

 16 inputs and 16 outputs are photo-coupler isolated

 0-48V universal wide range sink or source input

 Build-in input programmable digital de-bounce circuit

 Accept external interrupt at all inputs

 On board NMOS 5-48Vdc wide range output

 Watch dog timer with default output at OUT07~OUT00

 TTL port configurable IO

 32-bit timer with time up interrupt

 Quadrature high speed counter with compare trigger out

 PWM output

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 16 isolated digital input

 Rated input voltage : 0-48Vdc

 Input Sink / Source : Hardware wired, 4 bit per group

 ON state : 8V(max)@4mA(min)

 OFF state : 12V(min)@3mA(max)

 Software debounce : No debounce, 50Hz, 100Hz, 200Hz, 1KHz

 Switching speed : 10K (limit by photo-coupler speed or by debounce circuit)

Main Card -- Output Section

 Output channel : 16 isolated digital output

 Output capacity : NMOS sink : continuous : 0.125A @5-48Vdc (all output on per port)

                                 50% duty : 0.5A @5-48Vdc (all output on per port)

                                 Instantaneous (10ms) : 2A@5-48Vdc (one output on per port)

Main Card -- Timer/Counter/PWM

 Timer time base : 1us

 Timer/counter length : 32-bit

 Counter frequency (max) : 8MHz

 PWM time base : 33MHz

 PWM frequency : 16-bit

 PWM duty : 16-bit

Main Card -- Quadrature counter

 Input multiple rate : x1, x2, x4 programmable (quadrature signal only)

 Counter length : 32-bit

Main Card -- TTL IO

 Port : 2

 Direction : software programmable on port base

 Software debounce : No debounce, up to 8MHz

Main Card -- General

 Card ID : 4-bit (rotary switch)

 Operation temperature : 0 to +70 degree C

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Storage temperature : -20 to +80 degree C

 Isolation voltage : 2500Vac 1Min

 Operation humidity : 5~95% RH, non-condensing

 I/O connector : 68 pin female Centronic type connector

 Dimensions : 144(W)*96(H) mm, 5.7(W)*3.8(H) in

DIN rail mounted wiring board

JS510681 68PF DIN rail mounted wiring board

 Connection cable :68 pin female Centronic type connector cable to connect main and wiring board

 Dimension : 86(W)*204(L)*52(H) mm, 3.4(W)*8.1(L)*2.1(H) in

JS51050 25PM DIN rail mounted wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

 Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

DIO8217

32-channel Digital I/O Card PCIe for 16 DI and 16 DO Photo-coupler isolated with 16 TTL IO

 2.

JS510681

DIN rail mounted dummy wiring board (68P SCSI-II female to terminals)

 3.

M26J68681M5FW

68-pin SCSI-II cable 1.5 M for JF0

 4.

M26J68683M0FW

68-pin SCSI-II cable 3.0 M for JF0

 5.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM0 TTL I/O

 6.

M270325X4

D type 25P male-female cable 1.5M for SM23404

 7.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404

 8.

M270325X0

D type 25P male-female cable 3.0M for SM23404

 9.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404

 10.

SM23404*

Extension kit for JM0 (bracket and flat cable for 25P female D type connector)