PWM Laser power control on the fly

 Touch probe / non-touch probe trigger to latch position

 Linear Scale / encoder F/B

 CCD Image Capture Trigger on the fly

Features

 PCI plug and play function with card ID for 16 identical cards

 High noise immunity with magnetic / photo-coupler isolation

 4 32-bit high speed counter for 16 MHz max. Quadrature input

 2 32-bit timer (X, Z axis)

 Quadrature, pulse / direction and up / down counting mode

 Programmable multiple rate at X1, X2, X4

 Load preset value to counter by external or software trigger

 Latch counter value by external trigger

 Multiple counter reset (homing) modes with clear output

 Differential or single-end input signal

 Compare mode : single, auto increment and FIFO compare mode (X, Z axis)

 Compare output gated and segment mask off

 PWM FIFO (X, Z axis) output

 Programmable duration for Compare out and Clear out

 Interrupt on external trigger, compare equal, borrow, carry and counter clear

 Supports DIN rail mounted wiring board

Specifications (With Matched Wiring Board)

Main Card -- Counter

 Number of axes : 4, independent

 Counter Input : A,B,Z

 Input debounce : 512K,1M, 2M, 4M, 8M, 10M, 16M

 Input Pulse multiple Rate : x1, x2, x4 programmable (quadrature signal only)

 Maximum quadrature input frequency : 16MHz @x1, x2, x4

 Maximum input pulse frequency : 16MHz

 Encoder Type : Single-end or differential

 Counter Length : 32-bit

 Counter modes : Quadrature, up / down, pulse / direction(Software select)

 Compare Mode : Single compare

                                Auto-Increment compare

                                FIFO compare with PWM FIFO

 Sample Clock Frequency : 198MHz

 Software homing(reset) counter method : 1 software trigger

 Hardware homing(reset) counter method : 5 H/W trigger

 Comparison FIFO Depth : 1023 (all axis)

 PWM FIFO Depth : 1023 (X, Z axis only)

 Compare out one shot duration : 1 ~ 16777215us

 Timer : 2 32-bit @1us time base

Main Card -- Digital Input

 Home : 1 per channel(Single-end or differential)

 Latch : 1 per channel(Single-end or differential)

 Clear counter : 1 per channel(Single-end or differential)

 General input : 1 per channel

 Debounce : 100, 200,1K, No debounce

 Polarity : non-inverting / inverting, all input signals are software programmable

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc (min) 3mA(max)

 Switching Speed : 2.2KHz max.(general input)

                                  2MHz(specific digital input)

Main Card -- Digital Output

 Clear Output (General Output) :1 per channel

 Compare Output (General Output) : 1 per channel

 Polarity : non-inverting / inverting, all output signals are software programmable

 Output rating : 3A @250Vac, 30Vdc(Relay)

                             1A @120Vdc(NMOS)

 Switching speed : 20KHz(max)(MOS out only)

Main Card -- General

 Card ID : 16 locations set by rotary switch

 Photo isolation : All digital I/O and counter Input

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 PCI bus data width : 32 bits

 Connector : One 68-pin SCSI II female connector

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 151(W)*110(H) mm, 6.0(W)*4.4(H) in

Main Card -- DIN rail mounted wiring board

ADP3144DIN,ADP3144ADIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 On Board Build-In s.p.s. : +5Vdc 500mA(Max)

 Specific Input : 24

 General Input : 4 with LED indicator

 General And Specific Output :

      ADP3144DIN(N) : 8 NMOS(Sink 1A @120Vdc) with LED indicator

      ADP3144DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

      ADP3144ADIN : High speed type 8 Open-collector (5~30Vdc) with LED indicator

 Accept Single-End Differential Input

 Specific Encoder/Linear Scale Input Connector : four D type 9P connectors

 Connector : One 68-pin SCSI II female connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : 86(W)*204(L)*53(H)mm, 3.4(W)*8.1(L)*2.1(H) in

 JS51050 25PM DIN rail mounted wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

Driver, DLL, Demo and Example Program

3D Models

Manual

Catalog

Winxp/7

(32bit)

Win7

(64bit)

Win10

(32bit)

Win10

(64bit)

 Labview

 LSI3144A

 ADP3144DIN(R/N)

 ADP3144ADIN

 JS51050

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

PRODUCT

DESCRIPTIONS

 1.

LSI3144A

4-axis Quadrature Encoder Counter Card with 2-axis FIFO compare mode (include SM23415)

 2.

ADP3144DIN(R)

DIN rail mounted wiring board matched LSI3144A, General output : 8 Relay for JF1

 3.

ADP3144DIN(N)

DIN rail mounted wiring board matched LSI3144A, General output : 8 power NMOS for JF1

 4.

ADP3144ADIN

DIN rail mounted wiring board matched LSI3144A, General output : 8 Open-collector (5Vdc ~ 30Vdc) for JF1

 5.

M2668681501

68-pin SCSI II cable 1.5M for JF1

 6.

M2668683001

68-pin SCSI II cable 3.0M for JF1

 7.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1

 8.

M270325X4

D type 25P male-female cable 1.5M for SM23415

 9.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23415

 10.

M270325X0

D type 25P male-female cable 3.0M for SM23415

 11.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23415

 12.

SM23415*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector)