Event counting

 Frequency counter

 Pulse signal receiver /display

 Linear Scale / encoder F/B

 CCD Image Capture Trigger on the fly

Features

 PCI plug and play function with card ID for 16 identical cards

 High noise immunity with magnetic / photo-coupler isolation

 Supports DIN rail mounted wiring board

 32-bit timer based on 1us time base

 8 photo isolated digital input

 8 photo isolated digital output

 Software debounce for digital input

 Software programmable I/O polarity

 Interrupt from IN00 ~ IN07

 32-bit counter

 16MHz max. Quadrature input rate

 Quadrature, pulse / direction and up / down counting

 Programmable multiple rate at X1, X2, X4

 Software debounce for input signals

 Multiple counter reset(homing) modes

 Differential or single-end input signal

 Compare mode : single, auto increment and FIFO compare mode

 Output gated and segment mask off

 Programmable duration for Compare output

 Interrupt on compare equal, FIFO near end

 8 position offset comparator

 8 offset compare equal output (differential out)

 Programmable duration for position offset compare output

Specifications (With Matched Wiring Board)

Main Card -- Counter

 Number of axes : 1

 Input : 5 magnetic isolation(A, B, Z, CLEAR, HOME input), TTL level

 Output : 1 magnetic isolation(compare out), TTL level

                   8 differential position offset compare out

 Maximum quadrature input frequency : 16MHz @ x1, x2, x4

 Encoder Type : Single-end or differential(with ADP3101/ADP3101D DIN wiring board)

 Input software debounce : 512K, 1M, 2M, 4M, 8M,10M,16M (programmable)

 Input multiple rate : X1, X2, X4 programmable(quadrature signal only)

 Counter length : 32-bit

 Position offset : 16-bit

 Counter Mode : (QUADRATURE), (CLOCK/DIRECTION), (UP CLOCK/ DOWN CLOCK)

 Compare Mode : Single compare

                                Auto-Increment compare

                                FIFO compare

 Sample clock frequency : 198MHz

 FIFO depth : 1023

 Compare out one shot duration : 1 ~ 65535us

Main Card -- Digital I/O

 Input : 8 photo-coupler isolated

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc(min) 3mA(max)

 Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter)

 Software debounce : 100Hz, 200Hz, 1KHZ,. No debounce(programmable)

 Interrupt : at IN00 ~ IN07

 Output : 8 photo-coupler isolated

 Output range : Open collector 0 ~ 45Vdc(on card)

 Output rating : (With ADP9201 DIN wiring board)

                              3A @250Vac, 30Vdc(Relay)

                              1A @48Vdc(NMOS)

                              1A @24Vdc(PMOS)

                              2A @240Vac(SSR)

 Sink current : 500mA(peak) per channel(on card)

 Switching speed : 20KHz(max)(MOS out only)

Main Card -- Timer

 Timer time base : 1us

 Timer / counter length : 32-bit

Main Card -- General

 Card ID : 16 locations set by rotary switch

 Insulation resistance : 1000M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 PCI bus data width : 32 bits

 Connector : one 20-pin SCSI II centronic female connector

                        two 20-pin flat cable connector

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in

DIN rail mounted wiring board

ADP3101DIN/ADP3101DDIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Single end / differential signal : jumper select

 Connector : 20-pin SCSI II centronic cable to connect main and wiring board

 On board build-in s.p.s. : +5Vdc 500mA(max)

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : 86(W)*103(L)*45(H)mm; 3.4(W)*4.1(L)*1.8(H)in

ADP9201DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator

                   ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator

                   ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in

                         ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in

JS51053 20PM DIN rail dummy wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

JS51050 25PM DIN rail mounted wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

Driver, DLL, Demo and Example Program

3D Models

Manual

Catalog

Winxp/7

(32bit)

Win7

(64bit)

Win10

(32bit)

Win10

(64bit)

 LSI3181

 ADP3101DIN

 ADP3101DDIN

 ADP9201DIN(R/P/S)

 ADP9201DIN(N)

 JS51050

 JS51053

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

PRODUCT

DESCRIPTIONS

 1.

LSI3181

One-axis Quadrature Encoder Counter Card with position offset compare function (up to 16MHz x4 quadrature input)(include SM23415)

 2.

ADP3101DIN

DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1

 3.

ADP3101DDIN

DIN rail mounted wiring board matched LSI3101/3101A/3181/8101/8181, quadrature counter related function for JF1 (True-differential)

 4.

M262020150

20-pin SCSI II centronic cable 1.5M for JF1

 5.

M262020300

20-pin SCSI II centronic cable 3.0M for JF1

 6.

JS51053

DIN rail mounted dummy wiring board for general digital I/O, Transistor out for ADP9201_JM1

 7.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for ADP9201_JM1

 8.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for ADP9201_JM1

 9.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for ADP9201_JM1

 10.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for ADP9201_JM1

 11.

M23207

20-pin flat cable 1.5M for ADP9201_JM1

 12.

M23209

20-pin flat cable 3.0M for ADP9201_JM1

 13.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 pulse handler interface

 14.

M270325X4

D type 25P male-female cable 1.5M for SM23415

 15.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23415

 16.

M270325X0

D type 25P male-female cable 3.0M for SM23415

 17.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23415

 18.

SM23415*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector)