Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                   Interlock/selective Sw. - Proximity switch

                   Aux. contact of transducer / detector

 As I/O of S/W PLC Controller

 Counting Application

                   Power MOS type output : drive high speed DC load

Features

 PCI plug and play function with card ID for 16 identical cards

 48 inputs and 16 outputs are photo-coupler isolated

 2 TTL input/output (DIO3248B)

 Build-in input de-bounce circuit / programmable digital de-bounce circuit (DIO3248B)

 Accept external interrupt at IN15~ IN0 (DIO3248B)

 8 input with counter function (DIO3248B)

 32 bit timer on 1us time base (DIO3248B)

 watch dog timer with default output at OUT7~OUT0 (DIO3248B)

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 48 isolated digital input

 Rated input voltage : DC 24V

 ON state : 2.8V(max) 4.5mA(min)

 OFF state : 8V(min) 3mA(max)

 Switching speed : 10K (limit by photo-coupler speed or by debounce circuit)

 Debounce : 2KHz max. (with on board default debounce) (DIO3248A)

                        software programmable @ 100,200,1K,2K Hz and no debounce (DIO3248B)

 Input counter : 16-bit (IN7 ~ IN0) (DIO3248B)

Main Card -- Output Section

 Output channel : 16 isolated digital output

 Output capacity : POWER MOS output : 1A continuous @120Vdc(N MOS max), @ 24Vdc (P MOS max)

                                 Relay output: 3A continuous@250Vac(max)

Main Card -- TTL IO (DIO3248B)

 Port : 2

 Direction : software programmable on port base

Main Card -- Timer (DIO3248B)

 Length : 32-bit @1us

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 4-bit

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 PCI bus data width : 32 bits

 Connector : One 68-pin SCSI II female connector

 Wiring board : 1 with round cable hook to main card

 External supply : DC 24 ± 4V

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 159(W)*106(H) mm, 6.3(W)*4.2(H) in

DIN rail mounted wiring board

ADP3248DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 48 with LED indicator, 8 digit per group with Green LED at first digit

 Output :

     ADP3248DIN(N) : 16 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit

     DIO3248DIN(P) : 16 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit

     DIO3248DIN(R) : 16 Relay( 3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit

 Power indicator : Red LED

 Operation temperature : 0 to 70 degree C

 Connector : One 68-pin SCSI II female connector

 Operation humidity : 5~95% RH, non-condensing

 Dimension : ADP3248DIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in

                        DIO3248DIN(P)/(R) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in

JS51050 25PM DIN rail dummy wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview 

 Hardware(DIO3248A)

 Hardware(DIO3248B)

 Software(DIO3248A)

 Software(DIO3248B)

 Main Card

 Wiring Board

 Driver(DIO3248A)

 Driver(DIO3248B)

 Driver(DIO3248A)

 Driver(DIO3248B)

 Driver(DIO3248A)

 Driver(DIO3248B)

 Driver(DIO3248A)

 Driver(DIO3248B)

PRODUCT

DESCRIPTIONS

 1.

DIO3248A

64-channel Digital I/O Card for 48 DI and 16 DO Photo-coupler isolated

 2.

DIO3248B

64-channel Digital I/O Card for 48 DI and 16 DO Photo-coupler isolated with 16TTL I/O

 3.

ADP3248DIN(N)

DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 power NMOS output

 4.

DIO3248DIN(P)

DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 power PMOS output

 5.

DIO3248DIN(R)

DIN rail mounted wiring board matched DIO3248A/3248B for 48 input and 16 Relay output

 6.

M266868150

68-pin SCSI II cable 1.5M for JF1

 7.

M266868300

68-pin SCSI II cable 3.0M for JF1

 8.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 TTL I/O (DIO3248B only)

 9.

M270325X4

D type 25P male-female cable 1.5M for SM23404 (DIO3248B only)

 10.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404 (DIO3248B only)

 11.

M270325X0

D type 25P male-female cable 3.0M for SM23404 (DIO3248B only)

 12.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404 (DIO3248B only)

 13.

SM23404*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (DIO3248B only)