Analog signal measurement for physical signal of temperature, voltage, current, flow, light......etc

 Digital i/o control of switch input, relay control, trigger output

 Counter / Timer for event counting, periodic interrupt source, PWM generator(can work as D/A with external low pass filter), counter / timer with trigger out, duration counter

Features

 8/16/24 channel 16-bit analog inputs (standard : 8 channels)

 Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V

 Single end or differential analog input

 Factory pre-calibrated analog conversion accuracy

 2 byte-wide programmable TTL I/O

 DIO00, DIO01 as trigger / counter in, DIO10, DIO11 as trigger out of timer / counter function

 2 32-bit multifunction timer/counters : programmable one-shot; square wave generator; event counter; PWM generator

Specifications (With Matched Wiring Board)

Main Card -- Analog Input

 Input channel : 8/16/24 channels (standard : 8 )

 Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V

 Resolution : 16-bit

 Input Impedance: 100K ohm

 Input type : single end or differential

 Range selection : software selectable per chip

 Conversion speed : 6us per chip

 Accuracy : full range within 5mV(after calibration)

 Integral Linearity Error : -3 ~ +3 LSB(max)

 Zero Error : - 28 ~ +28 LSB

Main Card -- TTL I/O

 I/O Channels : 16 TTL (port 0, port 1)

 Configuration : byte input / output

 Output Capacity : (sink or source) 24mA @5V

 Output at power on : jumper configurable at high or low

Main Card -- Timer / Counter

 Channels : 2

 Data length : 32-bit

 Specific input : trigger in / counter in via digital I/O port 0

 Time base : timer @1MHz, counter @33MHz

 Specific output : trigger out / counter out via digital I/O port 1

 Multi-function : programmable one-shot; square wave generator; event counter; PWM generator (Time base 33MHz)

Main Card -- General

 Interrupt : from TTL or Timer/counter

 Operation temperature : 0 to +70 degree C

 PCI data width : 32-bit

 Storage temperature : -20 to +80 degree C

 Card ID : 4-bit

 Operation humidity : 5~95% RH, non-condensing

 Dimension : 156(W)*112(H) mm, 6.2(W)*4.5(H) in

DIN rail mounted wiring board

 Connection cable : D type 37P cable to connect main and wiring board

 Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

Winxp/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

AIO3310A

Analog I/O Card 8 channels analog input, 16 TTL I/O and multi function timer / counter

 2.

AIO3311A

Analog I/O Card 16 channels analog input, 16 TTL I/O and multi function timer / counter (include bracket kit for 16AI)

 3.

AIO3312A

Analog I/O Card 24 channels analog input, 16 TTL I/O and multi function timer / counter (include bracket kit for 16AI)

 4.

JS51026

DIN rail mounted dummy wiring board (D type 37P male to terminals )

 5.

M270337X0

D type 37P male-female cable 1.5M for JF1

 6.

M270337X0S

D type 37P male-female cable 1.5M, shielding for JF1

 7.

M270337X2

D type 37P male-female cable 3.0M for JF1

 8.

M270337X2S

D type 37P male-female cable 3.0M, shielding for JF1

 9.

SM23403*

Extension kit (bracket and flat cable for 37P female D type connector) (AIO3311A/12A only)