Analog input section : For measurement of analog signal such as : temperature; voltage; current; flowlight

     Note : The analog signal should be pre-processed to the acceptable range of the card.

 Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control

 Digital section : For the control of digital i/o : switch input; relay control; trigger output

 Timer section : event counting; periodic interrupt source; duration counter

Features

 Software programmable Single end 8 channel or differential 4 channel AD input

 AD Resolution : 12/16-bit

 Software selectable input range : -10V~ +10V, -5V~ +5V, 0~ +10V, 0~ +5V

 2 channel DA output for -10~ +10V

 DA resolution : 13/17-bit

 8 bit isolated digital input

 8 bit isolated digital output

 No output transition during start-up

 Software debounce : No debounce, 100Hz, 200Hz, 1KHz

 Keep output state after hot reset (jumper selectable)

 External triggered interrupt(on IN07 ~ IN00)

 32-bit timer with zero-crossing interrupt

Specifications (With Matched Wiring Board)

Main Card -- Analog Input

 Input Channels : single end 8 channel(max) or differential 4 channel(max)

 Resolution : 12-bit (AIO6328) /16-bit (AIO6328A)

 Input Range : 0 ~ 5V, -5V ~ +5V, 0 ~ 10V, -10V ~ +10V

 Input Impedance : 21K ohm (unipolar), 16K ohm (bipolar)

 Conversion speed : 10us per channel

 Integral linearity error : -1~ +1 LSB

 Zero Error : Bipolar -10~ +10 LSB(max)

                        Unipolar -5~ +5 LSB(max)

 Gain Error : -10~ +10 LSB(max)

Main Card -- Analog Output

 Output Channel : 2

 Resolution : 13-bit (AIO6328) /17-bit (AIO6328A)

 Range : -10V ~ +10V

 Capacity : ±10mA(typ)

 Capacitive load : ≦1000pf

Main Card -- Digital I/O

 I/O channels : isolated 8DI, 8DO

 Output range : open collector 0 ~ 45Vdc(without wiring board)

 Sink current : 500mA(peak) per output bit(without wiring board)

 Switch speed : 20KHz(without wiring board or MOS type output)

 Output rating : using wiring board ADP9201DIN series

                             3A @250Vac, 30Vdc(Relay)

                             1A @48Vdc(NMOS)

                             1A @24Vdc(PMOS)

                             2A @240Vac(SSR)

Main Card -- Timer / Counter

 Channels : 1

 Data length : 32-bit

 Time Base : timer @1MHz

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 0 ~ 3

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min(digital block only)

 Connector : One 20-pin male flat cable connector

                        One slim type 26-pin male flat cable connector

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 90(W)*96(H) mm, 3.6(W)*3.8(H) in

DIN rail mounted wiring board

ADP9201DIN DIN rail mounted wiring board for DIO

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator

                   ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator

                   ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in

                         ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in

JS51053 20PM DIN rail mounted wiring board or DIO

 Connection cable : 20-pin flat cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

JS510501 25PF DIN rail mounted wiring board for AD/DA

 On board Connector : Female D type 25P

 Dimension : 86(W)*79(L)*52(H)mm, 3.4(W)*3.2(L)*2.1(H) in

Driver, DLL, Demo and Example Program

3D Models

Manual

Catalog

Winxp/7

(32bit)

Win7

(64bit)

Win10

(32bit)

Win10

(64bit)

 Labview

 Linux 2.6

 AIO6328

 AIO6328A

 ADP9201DIN(R/P/S)

 ADP9201DIN(N)

 JS51053

 JS510501

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

PRODUCT

DESCRIPTIONS

 1.

AIO6328

12-bit Analog I/O and Digital I/O PCI-104 Module

 2.

AIO6328A

16-bit Analog I/O and Digital I/O PCI-104 Module

 3.

JS51053

DIN rail mounted dummy wiring board for JM1

 4.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for JM1

 5.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM1

 6.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI,8 DO for JM1

 7.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM1

 8.

M23207

20-pin flat cable 1.5M for JM1

 9.

M23209

20-pin flat cable 3.0M for JM1

 10.

JS510501

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM2

 11.

M270325X4

D type 25P male-female extension cable 1.5M for M23405

 12.

M270325X4S

D type 25P male-female extension cable 1.5M, shielding for M23405

 13.

M270325X0

D type 25P male-female extension cable 3.0M for M23405

 14.

M270325X0S

D type 25P male-female extension cable 3.0M, shielding for M23405

 15.

M23405

Extension kit for JM2 (flat cable for 25P male D type connector) (Option)