Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                   Interlock/selective Sw. - Proximity switch

                   Aux. contact of transducer / detector

 As I/O of software PLC Controller

 Low speed counter

 Frequency counter

 Hardware event capture

Features

 PCI plug and play function with card ID for 16 identical cards

 32 inputs and 32 outputs are photo-coupler isolated

 2 TTL input/output (DIO3232B)

 Build-in input de-bounce circuit / programmable digital de-bounce circuit (DIO3232B)

 Acceptexternal interrupt at IN00, IN01 /  IN07~IN00, IN17~ IN10 (DIO3232B)

 8 input with counter / frequency counter function (DIO3232B)

 32 bit timer on 1us time base (DIO3232B)

 watch dog timer with default output at OUT07~OUT00 (DIO3232B)

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 32 isolated digital input

 Rated input voltage : 24Vdc

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc(min) 3mA(max)

 Switching speed :10K (limit by photo-coupler speed or by debounce circuit)

 Debounce :  2KHz max. (with on board default debounce) (DIO3232A)

                         software programmable @ 100,200,1K,2K Hz and no debounce (DIO3232B)

 Input counter : 16-bit (IN07 ~ IN00) (DIO3232B)

 Frequency counter : 16-bit (IN07 ~ IN00) (DIO3232B)

Main Card -- Output Section

 Output channel : 32 isolated digital output

 Output capacity : POWER MOS output: 1A continuous @120Vdc(N MOS max), @ 24Vdc (P MOS max)

                                 Relay output: 3A continuous@250Vac(max)

 Switching speed : 20KHz(max)(MOS out only)

Main Card -- TTL IO (DIO3232B)

 Port : 2

 Direction : software programmable on port base

 Software debounce : No debounce, up to 10MHz

Main Card -- Timer (DIO3232B)

 Length : 32-bit @1us

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 16 locations set by rotary switch

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Isolation voltage : 2500Vac 1Min

 PCI bus data width : 32 bits

 Connector : 68 pin female SCSI II connector

 Wiring board : 1 with round cable hook to main card

 External supply : 24Vdc ± 4Vdc

 Operation temperature : 0 to +70 degree C

 Storage temperature : -20 to +80 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimensions : 159(W)*106(H) mm, 6.3(W)*4.2(H) in

DIN rail mounted wiring board

ADP3232ADIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 32 with LED indicator, 8 digit per group with Green LED at first digit

 Output : ADP3232ADIN(N) : 32 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit

                   ADP3232ADIN(P) : 32 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit

                   ADP3232ADIN(R) : 32 Relay(3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit

 Power indicator : Red LED

 Terminal : every 4 has one common terminal (Different “common” for different positive power terminal )

 Connector : 68 pin female SCSI II connector

 Operation temperature : 0 to 70 degree C

 Operation humidity : 5~95% RH, non-condensing

 Dimension : ADP3232ADIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in

                         ADP3232ADIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in

                         ADP3232ADIN(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in

JS51050 25PM DIN rail dummy wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in