Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                   Interlock/selective Sw. - Proximity switch

                   Aux. contact of transducer / detector

  As I/O of S/W PLC Controller

Features

 8 isolated digital input and 8 isolated relay digital output

 High voltage isolation on all isolated channel(2500Vac)

 Software debounce : No debounce, 100Hz, 200Hz, 1KHz

 External triggered interrupt (on IN0, IN1)

 DIN rail wiring board

 No output transition during start up

 Wide bipolar input range 5 ~ 12Vdc or 12 ~ 50Vdc (jumper selectable)

 4 c-contact and 4 a/b contact(jumper selectable) Relay output

 Keep output state after hot reset (jumper selectable)

 Multi-function timer/counter

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input channel : 8 isolated digital input

 Input range : 5V ~ 12V or 12V ~ 50V(jumper selectable)

 Input logic low voltage (V _IL) : 2.8Vdc(max) @5Vdc~12Vdc

                                                    10Vdc(max) @12Vdc~50Vdc

 Input logic high voltage (V _IH) : 8Vdc(min), 3mA(max)

 Switching speed :2.2KHz max.(with on board debounce circuit)

Main Card -- Output Section

 Output channel: 8 isolated relay output

 Expected electrical life : 5 million ops (no load)

 Output rating : 1A @120Vac

 Max. switching rage : 300ops. / min.(no load)

                             1A @24Vdc

                                        30ops. / min.(rated load)

Main Card -- Timer

 Channels : 1

  Timer length : 32-bit

 Specific input : trigger in / counter in via digital I/O IN0

 Specific output : trigger out / counter out via digital I/O OUT0

 Time Base : timer @1MHz, Multi-Functions counter @33MHz

 Multi-functions for : programmable one-shot; square wave generator; event counter; PWM generator

Main Card -- General

 Card ID : 4-bit

 Operation temperature : 0 to +70 degree C

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Storage temperature : -20 to +80 degree C

 Isolation voltage : 2500Vac 1Min

 Operation humidity : 5~95% RH, non-condensing

 Connector : One 37-pin female connector

 Dimensions  : 130(W)*102(H) mm, 5.2(W)*4.1(H) in

DIN rail mounted wiring board

 Connection cable D type 37P cable to connect main and wiring board

 Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview  

 Linux 2.6

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

DIO3208B

16-channel Digital I/O Card for 8 Photo-coupler isolated DI and 8 Relay DO with multi-function timer / counter

 2.

JS51026

DIN rail mounted dummy wiring board (D type 37P male to terminals )

 3.

M270337X0

D type 37P male-female cable 1.5M for JF1

 4.

M270337X0S

D type 37P male-female cable 1.5M, shielding for JF1

 5.

M270337X2

D type 37P male-female cable 3.0M for JF1

 6.

M270337X2S

D type 37P male-female cable 3.0M, shielding for JF1