Analog Input Section : For measurement of analog signal such as : temperature; voltage; current; flow; light ...

     Note : The analog signal should be pre-processed to the acceptable range of the card.

 Analog Output Section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control...

 Digital Section : For the control of digital i/o : switch input; relay control; trigger output......

Features

 On board Analog and digital I/O over voltage/ current protection

 32 channels 12/16-bit Analog input

 single end or differential analog input

 Software selectable input range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V

 End of conversion interrupt

 2 channel 12/16-bit analog output

 Output range : -10 ~ +10V

 2 port TTL digital I/O channels

 Programmable digital filter at 100Hz, 200Hz, 1KHz and no de-bounce for input

 No output transition during start-up

 Output status read back

 External triggered interrupt(on IO07 ~ IO00)

 32-bit timer with cross zero interrupt

Specifications (With Matched Wiring Board)

Main Card -- Analog Input

 Input Channel : 32 channel single end or 16 channels differential

 Resolution : 12-bit (AIO3315),16-bit (AIO3315A)

 Input Range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V

 Input Impedance : 42K ohm(unipolar)

 Integral linearity error : -1 ~ +1 LSB(max)(AIO3315) ,-3 ~ +3 LSB(max)(AIO3315A)

                                   31K ohm (bipolar)

 Conversion speed : 10us per channel

 Full scale error : Bipolar -0.45% ~ +0.45%(max) (AIO3315),  -0.4% ~ +0.4%(max)(AIO3315A)

 Zero error : Bipolar -9 ~ +9 LSB(max) (AIO3315), Bipolar -28 ~ +28 LSB(max)(AIO3315A)

                               Unipolar -0.75% ~ +0.75%(max)

                       Unipolar -6 ~ +6 LSB(max) (AIO3315), Unipolar-25 ~ +25 LSB(max)(AIO3315A)

 On board analog input protection : -24V ~ +24V 50mA

Main Card -- Analog Output

 Output channel : 2

 Range : -10 ~ +10V

 Resolution : 12-bit (AIO3315),16-bit (AIO3315A)

 Conversion time : < 1us

 Integral linearity error : -4 ~ +4 LSB(max)

 Differential linearity error : -0.5 ~ +0.5 LSB(max)

 Zero error : 9 LSB(max)

 Offset error : 9 LSB(max)

 Full scale error : -0.7% ~ +0.7%(max)

 On board analog output protection : 50mA

Main Card -- TTL I/O

 IO Channels : 16(max) TTL level

 Interrupt at IO00 ~ IO07

 On board input protection : 24V 50mA

 Output source : 35mA(peak) per channel

 Output Sink : 35mA(peak) per channel

 On board IO channel protection : -24V ~ +24V 50mA

Main Card -- Timer

 Channels : 1

 Data length : 32-bit

 Time Base : @1MHz

Main Card -- General

 Interrupt : from TTL port0 or Timer/counter

 Card ID : 4-bit

 Connector : D type 37P connector for analog I/O

 Operation temperature : 0 to +70 degree C

                         D type 25P connector for TTL I/O

 Storage temperature : -20 to +80 degree C

 Dimensions : 130(W)*102(H) mm, 5.2(W)*4.1(H) in 

 Operation humidity : 5~95% RH, non-condensing

DIN rail mounted wiring board

JS51026 37PM DIN rail mounted wiring board

 Connection cable : D type 37P cable to connect main and wiring board

 Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in

JS51050 25PM DIN rail mounted wiring board

 Connection cable : D type 25P cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

 Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

AIO3315

12-bit Analog Multi-IO Card 32 AI 2 AO 16 TTL IO Card (include bracket kit for TTL I/O )

 2.

AIO3315A

16-bit Analog Multi-IO Card 32 AI 2 AO 16 TTL IO Card (include bracket kit for TTL I/O )

 3.

JS51026

DIN rail mounted dummy wiring board (D type 37P male to terminals) for JF1

 4.

M270337X0

D type 37P male-female cable 1.5M for JF1

 5.

M270337X0S

D type 37P male-female cable 1.5M, shielding for JF1

 6.

M270337X2

D type 37P male-female cable 3.0M for JF1

 7.

M270337X2S

D type 37P male-female cable 3.0M, shielding for JF1

 8.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1 TTL I/O

 9.

M270325X4

D type 25P male-female cable 1.5M for SM23404

 10.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404

 11.

M270325X0

D type 25P male-female cable 3.0M for SM23404

 12.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404

 13.

SM23404*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector)