Analog input section : For measurement of analog signal such as : temperature; voltage; current; flow light

 Analog output section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; valve control; light control

 Digital section : For the control of digital i/o : switch input; relay control; trigger output

 Counter / Timer section : event counting; periodic interrupt source; PWM generator (can work as D/A with external low pass filter); counter / timer with trigger out; duration counter

Features

 Isolated 8 channel 16-bit analog inputs

 Software selectable input range : -10V ~ +10V,  -5V ~ +5V, 0 ~10V, 0 ~ 5V

 Isolated 8/16 channel 16-bit analog output

 Output range : -10V~ +10V

 8 isolated digital input

 8 isolated digital output

 IN0, IN1 as trigger / counter in, OUT0, OUT1 as trigger out of timer / counter function

 2 32-bit multifunction counters up to 33MHz : programmable one-shot; square wave generator; event counter; PWM generator

Specifications (With Matched Wiring Board)

Main Card -- Analog Input

 Input channels : isolated 8 channel single end

 Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V

 Resolution : 16-bit

 Input Impedance : 21K ohm (unipolar)

 Conversion speed : 13us per channel

                                   16K ohm (bipolar)

 Zero Error : Bipolar -10~ +10 LSB(max)

 Integral linearity error : -1~ +1 LSB

                        Unipolar -5~ +5 LSB(max)

 Gain Error : -10~ +10 LSB(max)

Main Card -- Analog Output

 Output channels :  isolated 8 channel(AIO3320A), isolated 16 channel (AIO3321A)

 Output range : -10V ~ +10V

 Resolution : 16-bit

 Auto scan update rate : 2.1KHz

Main Card -- Digital I/O

 I/O channels : isolated 8DI, 8DO

 Output range : open collector 0 ~ 45Vdc(without wiring board)

 Sink current : 500mA(peak) per output bit(without wiring board)

 Switch speed : 20KHz(without wiring board or MOS type output)

 Output rating : using wiring board ADP9201DIN series

                            3A @250Vac, 30Vdc(Relay)

                            1A @48Vdc(NMOS)

                            1A @24Vdc(PMOS)

                            2A @240Vac(SSR)

Main Card -- Timer / Counter

 Channels : 2

 Data length : 32-bit

 Specific input : trigger in / counter in via digital I/O port0

 Time base :  timer @4MHz, counter @33MHz

 Specific output : trigger out / counter out via digital I/O port 1

 Multi-function : programmable one-shot; square wave generator; event counter; PWM generator

Main Card -- General

 Interrupt : from Timer/counter

 Operation temperature : 0 to +70 degree C

 PCI data width : 32-bit

 Storage temperature : -20 to +80 degree C

 Card ID : 4-bit

 Operation humidity : 5~95% RH, non-condensing

 Dimension : 175(W)*120(H) mm, 6.9(W)*4.8(H) in

DIN rail mounted wiring board

JS51026 37PM DIN rail mounted wiring board for AI0 ~ AI7 and DA0 ~ DA7

 Connection cable : D type 37P cable to connect main and wiring board

 Dimension : 90(W)*113(L)*60(H) mm, 3.6(W)*4.5(L)*2.4(H) in

JS51053 20PM DIN rail mounted wiring board for JM2 digital I/O

 Connection cable : 20-pin flat cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

ADP9201DIN DIN rail mounted wiring board for JM2 digital I/O

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator 

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator

                  ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator

                  ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension :  ADP9201DIN(R) / (N) / (P) : 86(W)*103(L)*45(H) mm, 3.4(W)*4.1(L)*1.8(H) in

                          ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

AIO3320A

Isolated Analog I/O Card, 8 channels analog input, 8 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O )

 2.

AIO3321A

Isolated Analog I/O Card, 8 channels analog input, 16 channels analog output and 16 isolated digital I/O and multi function timer / counter (include bracket kit for digital I/O and AO)

 3.

JS51053

DIN rail mounted dummy wiring board for JM2

 4.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI,8 DO for JM2

 5.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO for JM2

 6.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO for JM2

 7.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO for JM2

 8.

M23207

20-pin flat cable 1.5M for ADP9201EK

 9.

M23209

20-pin flat cable 3.0M for ADP9201EK

 10.

M232011*

20-pin flat cable 20cm for ADP9201EK to JM2

 11.

ADP9201EK*

ADP9201 Extension kit for JM2

 12.

JS51026

DIN rail mounted dummy wiring board (D type 37P male to terminals) for JF1

 13.

M270337X0

D type 37P male-female cable 1.5M for JF1

 14.

M270337X0S

D type 37P male-female cable 1.5M, shielding for JF1

 15.

M270337X2

D type 37P male-female cable 3.0M for JF1

 16.

M270337X2S

D type 37P male-female cable 3.0M, shielding for JF1

 17.

JS51050

DIN rail mounted dummy wiring board (D type 25P male to terminals ) for JM1(AIO3321A only)

 18.

M270325X4

D type 25P male-female cable 1.5M for SM23404 (AIO3321A only)

 19.

M270325X4S

D type 25P male-female cable 1.5M, shielding for SM23404 (AIO3321A only)

 20.

M270325X0

D type 25P male-female cable 3.0M for SM23404 (AIO3321A only)

 21.

M270325X0S

D type 25P male-female cable 3.0M, shielding for SM23404 (AIO3321A only)

 22.

SM23404*

Extension kit for JM1 (bracket and flat cable for 25P female D type connector) (AIO3321A only)